GS154 

5 minute working time. A two-component, blend of liquid epoxy polymer and proprietary curing agents, which is able to displace water from wet surfaces to make a permanent bond. 1:1 mixture of white and black components. Used for dent repair and will effectively transfer the load from the corrosion pit to the composite sleeve.


5/20 Epoxy Stick™ 

5 minute working time, 20 minute set.  A two-component, epoxy based material furnished in sticks with the Parts A and B co-axially extruded together so that a portion of the stick can be cut off, kneaded together, yielding the proper mix ratio without measurement of special containers.  This formula is designed for and set up for rapid cure and exceptional adhesion to carbon steel surfaces.  The cured product is resistant to most hydrocarbons, ketones, alcohols, esters, halocarbons, fresh and salt water, dilute acids and bases.  Use to plug holes and stop leaks.  Can be sanded and machined after full cure. Available in 7” long sticks.


​5/20 UW Epoxy Stick™ 

5 minute working time, 20 minute set, cures underwater. A two-component, epoxy based material furnished in sticks with the Parts A and B co-axially extruded together so that a portion of the stick can be cut off, kneaded together, yielding the proper mix ratio without measurement of special containers.  This special formula is designed for underwater use and is set up for rapid cure and exceptional adhesion to carbon steel surfaces.  The cured product is resistant to most hydrocarbons, ketones, alcohols, esters, halocarbons, fresh and salt water, dilute acids and bases.  Use to plug holes and stop leaks.  Can be sanded and machined after full cure. Available in 7” long sticks.

BP-1 Base Primer System

A two-component polyurethane based system designed for general use. BP-1 contains glass fibers for additional strength. It works well with steel, stainless steel, aluminum, copper, wood, and concrete. It may also be used on some plastics such as PVC, polyethylene, and fiberglass.


BP-2 Base Primer System

A one-component urethane based system specifically intended to bond uncured Aquawrap® to cured Aquawrap® surfaces. It is designed for use in heavy Aquawrap® lay-ups where all of the layers are unable to be applied at the same time.


BP-4 System for Underwater

A two-component epoxy-based system designed specifically for underwater applicatins where concrete is the parent material. It is a solvent-free, non-sag formulation with excellent chemical and abraision resistance. Kevlar microfibers reinforce against hairline cracking and chipping. When working in the splash zone or under water this system is an excellent choice for use as a protective coating over a cured Aquawrap installation. Color is light grey.


GS561

30 minute working time. A two-component blend of liquid epoxy polymer and proprietary curing agents, which are able to displace water from wet surfaces and make a permanent bond. Perfect for splash zone applications.  1;1 mixture of blue and yellow components. Used to fill corrosion pits prior to applying Aquawrap sleeve and also as a final coating to prevent UV damage and unforeseen chemical exposure. 

The application will determine which primer or adhesive we recommend using. We customize or products to suit particular projects. Because it's our job to know what products to use on a given repair design, we utilize epoxies with differing capabilities. 

C & E Overview

Integ Composite Technology © .  ALL RIGHTS RESERVED.